decorflame M100-25FAO Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} decorflame M100-25FAO. decorflame M100-25FAO 12 pages. Electric fireplace heater

Imprimer la page

A S S E M B LY I N S T R U C T I O N S

Step 6: Attach Top panel [A] to the unit as

shown in Fig. F with 4 KD screws.

Step 7: Tighten all KD SCREWS.

FIREPLACE INSERT

INSTALLATION

The fireplace insert can be installed after the

mantel has been fully assembled.

WARNING: Make sure the fireplace insert

controls are in the OFF position and the unit

is NOT plugged in.

Fig. E

Fig. F

Step 1: Carefully place the INSERT in the

unit opening. The front of INSERT should be

flush with the front of the mantel. Carefully

lift the INSERT into the mantel until the top

stopper is against the mantel.

Step 2: Attach top side of the insert with

3 Med bracket [T] and 3 Med KD screws

[V]. Attach 2 Mounting Brackets [U] at the

bottom side of insert with 2 Med KD screws.

See Fig. G.

Step 3: Move assembled unit to desired

location. Unit should not be positioned in

area exposed to direct sunlight.

WALL ANCHOR

SAFETY CABLE

The use of WALL ANCHOR SAFETY CABLE

is highly recommended in order to reduce

the risk of the fireplace being tipped over

accidentally. WARNING: This CABLE may

reduce possible risk of injury if the fireplace

is improperly handled, but is not a substi-

tute for proper adult supervision. Children

should not be left unattended near any

heater.

Fig. G