ADGT EDM106 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ADGT EDM106. ADGT EDM106 19 pages. Serial-to-ethernet converters

Imprimer la page

Technical specifications

Parameter
Microcontroller STM32F207VCT
Processor
Flash-memory
RAM
Interfaces
Ethernet (x1)
RS-232 (x1)
RS-485 (x2)/RS-422 (x1)
Output 8.5V (x1)
PWR (x1)
Parameters of serial interfaces
Port speed
Number of data bits
Parity check
Stop bit length
Flow control
Transmitted signals
Power supply
Power supply voltage
Power consumption
Connector
Mechanical parameters
Dimensions (L x W x H)
Weight
Material of housing
Installation options
MTBF
Average service life
Operating conditions
Operating temperature
Relative air humidity
Phone: +420 538 890 720
ARM 32-bit Cortex
TM
-M3 120 MHz
256 Kb
128 Kb
RJ-45, 10/100 Base-TX. Transmition protocol: TCP/IP
DB-9F (COM-port)
Connector – terminal block (XP1, XP2: terminals A1, B1, A2, B2);
type of mating part - terminal block with screw connector (step – 3.81mm).
Max. communication range
Load capability: up to 32 units of load or up to 256 devices with 1/8 of load
capability. Terminal resistor: pluggable (120 Ohm). Galvanical isolation: optional
(in the model EDM106-G)
8.5V output for power supply of external devices. Load current - up to 50 mA.
Connector – terminal block (XP2: terminal VO), step - 3,81 mm.
Connector – RJ-12, power supply voltage 10-30 V.
600-115200 bit/sec
7, 8
none, odd, even
1, 0.5, 1.5, 2
enable / disable
RS-232: TxD, RxD, RTS, CTS
RS-485: Data A (+), Data B (-)
RS-422: Y+, Z-, A+, B-
10...30 V DC
max. – 1.5 W
Connector – terminal block (XP2: terminals G(-) and VI(+)), step - 3,81 mm.
Connector – RJ-12
76 x 65 x 35 mm
122 g
aluminum alloy (IP30)
DIN-rail, wall-mounted, desktop (rubber feet)
100 000 hours
10 years
-40...+70°C
no more than 95% at temperature +35°C
5
EDM Serial-to-Ethernet Converters
User Guide ver. 2.0 | 2021-09-01
Table 1. Converter EDM106. Technical specifications.
Description
— up to 1000 m at 115200 bit/sec.