Avaya BCM50 Manuel de configuration technique - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de configuration technique pour {nom_de_la_catégorie} Avaya BCM50. Avaya BCM50 18 pages. Business communication manager for skype sip connect service
Également pour Avaya BCM50 : Manuel de configuration (14 pages)
will be added in subsequent phases of Avaya Automatic QoS. Avaya Automatic QoS Edge (mixed and
pure mode) is planned for the ERS 2500 in a future release.
1.2 Avaya Automatic QoS Support
1.2.1 Ethernet Switches – Avaya Automatic QoS Edge Support
Avaya Automatic QoS is available on the Avaya switching platforms shown below.
ERS 4500
o
Release 5.2
o
Edge with Avaya Automatic QoS mixed or pure mode
ERS 5000
o
Release 6.0 (not formally supported)
o
Release 6.1 (Q209 with formal support)
o
Edge with Avaya Automatic QoS mixed or pure mode
ERS 2500
o
POI Q409
1.2.2 Ethernet Switches – Avaya Automatic QoS Core Support
In order to support Avaya Automatic QoS pure mode (DSCP values maintained end to end over Avaya
infrastructure), the core switches must be able to recognize and honor the Avaya Automatic QoS DSCP
values.
Presently, only Avaya Automatic QoS Edge mixed mode is supported. When the edge switch is
configured for Avaya Automatic QoS Edge mixed mode, the application traffic that is recognized by the
edge switch is remarked to standard DSCP values as shown in Table 1. In the core, these DSCP values
can then be recognized and honored by either Avaya or any third party core switch supporting
Differentiated Services.
Avaya Automatic QoS Core support will be added to the following switches as shown below. The will
allow the Core Ethernet switch to recognize and honor the DSCP value when the Edge switch is
configured for Avaya Automatic QoS pure mode without the requirement of the Edge switch to remark the
Avaya Automatic QoS values from the attached device.
ERS 8300
o
POR Q209
ERS 8600
o
POI Q209
Ethernet Routing Switch 4500, 5000, Avaya BCM 50, 450, Avaya CS 1000, Avaya CS 2100, Avaya SRG 50
avaya.com
7