Align-Pilates M2-Pro Reformer Instructions d'assemblage et manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et manuel d'utilisation pour {nom_de_la_catégorie} Align-Pilates M2-Pro Reformer. Align-Pilates M2-Pro Reformer 12 pages. Reformer
6) Fitting the Standing platform
a. Next, fit the standing platform, this was originally packed within the main box. It can be inserted either way
round; first retract the locking knob, then insert the standing platform, and then tighten the knob. Always secure
the standing platform with the locking knob. Note: the standing platform can be used with or without the
optional platform extender.
7) Fitting the optional Jump Board
a. The optional jump board is interchangeable with the standing platform
b. When using the jump board the footbar must be in the third lowest position so the jump board is supported by
the footbar. Never use the jump board without it being supported by the padded footbar. When inserted tighten the
knob to hold the jump board safely in position.
Optional Extras
Accessories for your M2-Pro Reformer
The M2-Pro Reformer has a complete range of optional accessories including: Half Cadillac with bracket, Mat
Converter, Jump Board and Standing Platform.
For the complete range of Align-Pilates apparatus & a complete range of Pilates mat work accessories please visit
www.Align-Pilates.com.
Mattress Convertor with
Sitting Box (choice of two models)
Jump Board
Half Cadillac
Platform Extender
9