Alinco DJ-196 Manuel d'instruction
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Alinco DJ-196. Alinco DJ-196 18 pages. Vhf/uhf fm transceiver
Également pour Alinco DJ-196 : Manuel d'instruction (20 pages)
Imprimer la page
DJ196 INSTRUCTION MANUAL
1. INNOVATIVE AND NEW FEATURES
. Comes equipped 39 CTCSS Tone Squelch function.
. Comes equipped 104DCS Digital code squelch function.
. TOT(Time Out Timer) can be set to a Duty Cycle most accommodating to the user's
requirements.
. Alphanumeric channel name function.
. Tone burst function（1750,2100,1000,1450Hz）
. Nine Autodial memories easily accessed from the DTMF keypad with redial function.
. Direct frequency entry from DTMF function.
. Burglary Alarm Function
. Mosquito Repel sound function.
2. SPECIFICATIONS
GENERAL
Frequency coverage T: TX 144-147.995MHz RX 135-173.995MHz
Mode
Channel steps
Memory channels
Antenna connector
Frequency stability
Microphone input impedance
Power supply requirement 6.0 - 16.0 V DC (negative ground)
Current drain (at 13.8 V DC) 1.2 A(typical) Transmit high at 5W
Usable temperature range -10 - +60 deg.
Dimensions
(Projections not included)
Weight Approx.375ｇ（with EBP-48N）
DTMF
Subaudible Tone(CTCSS) encoder/decoder installed(39tones)
Subaudible Tone (DCS) encoder/decoder installed(104codes)
TRANSMITTER
Output power
Modulation system Variable reactance frequency modulation
Spurious emissions
Max.frequency deviation +/-5Hz
E: TX 144-145.995MHz RX 144-145.995MHz
TA2: TX 150-173.995MHz RX 135-173.995MHz
F3E (FM)
5,10,12.5,15,20,25,& 30kHz
40 channels＋1CALL channel
BNC(50ohm unbalanced）
+/-5 ppm
2Kohm nominal
200 mA(typical) Receive at 280mW
50 mA(typical) standby
56(Ｗ）＊124(H)＊ 40(D)mm (with EBP-48N)
16 Buttons Keypad
Approx. 5 W EBP-48N installed
Approx. 5 W 13.8 V DC
Approx. 0.8 W (LOW)
Less than -60dB