Brother 885-X13 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Brother 885-X13. Brother 885-X13 48 pages.
Également pour Brother 885-X13 : Manuel d'utilisation (48 pages), Manuel d'utilisation (48 pages)

Imprimer la page

KNOWING YOUR SEWING MACHINE — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

THE MAIN PARTS

1 Bobbin winder (Page 12)

This winds the thread onto the bobbin for use as the

lower thread.

2 Stitch length dial (Page 11)

Rotate the dial to control the stitch length.

3 Spool pin (Page 12, 16)

This holds the spool of thread.

4 Upper tension-control dial (Page 26)

This controls the tension of the upper thread.

5 Thread guide (Page 12, 16)

This is used when winding the thread onto the

bobbin and then threading the machine.

6 Thread take-up lever (Page 17)

7 Thread cutter (Page 23)

Pass the threads through the thread cutter to cut

them.

8 Needle threader (Page 18)

(This is only available on certain models.)

9 Quick-set bobbin (Page 15, 20)

(This is only available on certain models.)

0 Flat bed attachment with accessory compartment

(Page 5)

A Presser foot (Page 8)

B Reverse sewing lever (Page 11)

Push this lever to stitch in the reverse direction.

C Pattern selection dial (Page 9)

Rotate the dial in either direction to choose the

stitch you want.

D Handwheel

Used to manually raise and lower the needle.

E Buttonhole fine-adjustment screw (Page 34)

F Main power and sewing light switch (Page 7)

You can turn the main power and sewing light

switch on and off.

G Foot controller jack / socket (Page 6)

Plug in the foot controller plug and connect the

machine to the power supply.

3 2

H Presser foot lever (Page 16)

Used to raise and lower the presser foot.

I Foot controller (Page 7)

You can use this to control the sewing speed, and to

start and stop sewing.

Foot Controller:

Model KD-1902 for 110-120V area

KD-1902 for 110-127V area (Brazil only)

Model KD-2902 for 220-240V area

The foot controller part code differs depending on the

country or region. Contact your dealer or the nearest

authorized service center.

Flat bed attachment

The accessories can be stored in a compartment inside

the flat bed attachment.

Slide the flat bed attachment to the left to

open it.

1 Flat bed attachment

2 Storage compartment