Garmin Colorado 400c Manuel du propriétaire - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin Colorado 400c. Garmin Colorado 400c 40 pages. Oregon series
Également pour Garmin Colorado 400c : Manuel du propriétaire (48 pages), Manuel de référence rapide (2 pages), Manuel de démarrage rapide (2 pages), Manuel du propriétaire (48 pages), Informations importantes en matière de sécurité (48 pages), Manuel du propriétaire (26 pages), Manuel (danois) (48 pages)

400c

ustomIzIng the

IshFInder

To adjust the Keel Offset:

1. Highlight Keel Offset, and press SELECT.

2. Use the ROCKER to set the value of the keel offset.

3. Press SELECT to accept the number.

NOtE: Press MENU to cancel your changes and return to the

Transducer menu.

Calibrate Water Speed—to use a speed sensing transducer, use

this menu to calibrate the speed sensor. If you are not using a speed

sensing transducer, this menu does not appear.

To calibrate the speed sensor:

1. Highlight Calibrate Water Speed, and press SELECT.

2. Bring the boat to cruising speed. Note your top speed, and

then stop the boat.

3. Highlight OK, and press SELECT.

NOtE: If the boat is not moving fast enough or the speed sensor

is not registering a speed, a "Speed too low" message appears.

Highlight OK, press SElECt, and safely increase boat speed. If

you get the message again, stop the boat and make sure the speed

sensor wheel is not stuck. If the wheel turns freely, check the

cable connections. If you continue to get the message, contact

Garmin Product Support.

Customizing Units of Measure

To change the units of measure, on the Configure screen, highlight

Units, and press SElECt.

Depth—select Feet (ft), Meters (m), or Fathoms (fa).

Water temp —select Fahrenheit (°F) or Celsius (°C) (with a

compatible transducer).

Water Speed—select Miles/Hour (mh), Kilometers/Hour (kh), or Knots

(kt) (with a compatible transducer).

Distance—select Statute (mi), Metric (km), or Nautical (nm) (with a

compatible transducer).

Fishfinder 400C Owner's Manual