Garmin Sport PRO Manuel du propriétaire - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin Sport PRO. Garmin Sport PRO 20 pages. Dog collar device gps
Également pour Garmin Sport PRO : Manuel du propriétaire (12 pages)
Imprimer la page
Gasket
Front enclosure
Replacing the Dog Collar Device
Battery
Before you can replace the battery, you
must remove all dirt, water, and debris
from the device. You also need a small
Phillips screwdriver and the security
screwdriver included in the battery
replacement kit.
1
Remove the six screws from the top
plate, and remove the top plate.
2
Remove the two screws from the
battery plate, and remove the battery
plate.
3
Grip the battery connector wires close
to the connector, and pull the
connector parallel to the circuit board
to disconnect the battery connector
from the device.
4
Remove the battery.
The battery fits tightly. It may be
necessary to pry the battery out of the
back plate using a non-sharp, non-
metal object.
5
Install the new battery into the front
enclosure with the label side of the
14
battery facing up, and the leading edge
of the battery placed under the
charging contact ledge of the device.
6
Replace the battery plate, and replace
and tighten the two screws.
7
Verify the gasket is not damaged and
is completely seated in the groove.
8
With the new battery, connect the
battery connector to the device.
When properly installed, the connector
plug snaps into the port.
9
Replace the front plate, and replace
and tighten the six screws to secure
the front plate.
10
Verify the gasket is not sticking out of
the device.
Device Information