Brother MFC-J6710DW Manuel d'installation rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC-J6710DW. Brother MFC-J6710DW 41 pages. Quick setup guide - spanish
Également pour Brother MFC-J6710DW : Manuel d'installation rapide (39 pages), Manuel d'instructions (17 pages), (anglais) Quick Configuration Guide (41 pages)
Imprimer la page
g
Unpack the ink cartridge.
Turn the green release lever on the orange
protective packing a clockwise until it clicks to
release the vacuum seal. Then remove the
orange protective packing a as shown.
IMPORTANT
DO NOT shake the ink cartridges. If ink stains
your skin or clothing, wash with soap or
detergent at once.
h
Take care to match the color of the lever a
with the cartridge color b, as shown in the
diagram below.
Install each ink cartridge in the direction of the
arrow on the label.
6
1
1 1
1
2
i
Gently push the back of the ink cartridge
marked "PUSH" until it clicks. After all the ink
cartridges are installed close the ink cartridge
cover.
Note
The machine will prepare the ink tube system for
printing. This process will take approximately four
minutes. Do not turn off the machine.