Brother Work Smart MFC-J870dw Manuel de démarrage rapide - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Brother Work Smart MFC-J870dw. Brother Work Smart MFC-J870dw 45 pages. Work smart series inkjet all-in-one
Également pour Brother Work Smart MFC-J870dw : Manuel Air Print (12 pages), Spécifications (2 pages), Manuel d'utilisation de base (14 pages)
Imprimer la page
USB
For Macintosh USB interface users
14
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
NOTE
For Mac OS X v10.6.0 to 10.6.7 users, upgrade to
Mac OS X v10.6.8 - 10.8.x.
15
Connect the USB cable
NOTE
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Lift the scanner cover until it locks securely into
the open position.
(Mac OS X v10.6.8, 10.7.x, 10.8.x)
b
Connect the USB cable to the USB port
marked with a
USB port inside the machine, as shown in the
callout below.
c
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your Macintosh.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
NOTE
If you have connected a telephone line, make
sure it is placed it into the cable channel first.
Press down gently on each additional cable as
you guide it through the channel.
Macintosh
symbol a. You will find the
1
15