AEG L 87680 FL Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 87680 FL. AEG L 87680 FL 36 pages.
Également pour AEG L 87680 FL : Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (32 pages)
10 www.aeg.com
K
L
5.4 Start/Pause button
Press button
programme.
5.5 Delay start button
Press button
programme from 30 minutes to 20 hours.
5.6 Time save button
Press button 6 to decrease the duration
of the programme.
– Press one time to set 'Shortened dura-
tion' for items with daily soil.
– Press two times to set 'Extra Quick' for
items with light soil.
Some programmes accept only
one of the two functions.
5.7 Extra rinse button
Press button
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
5.8 The Stain-Prewash button
8
Press button
a prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related
The extra rinse symbol comes on when this function is acti-
vated.
The value shows the total number of the rinses.
The indicator bar is fully filled when you set to the maxi-
mum number of rinses.
The Stain symbol comes on when you activate the function.
The Prewash symbol comes on when you activate the func-
tion.
The indicator bar is not fully filled when you set only one of
the functions.
The indicator bar is fully filled when you set the two func-
tions.
4
to start or interrupt a
4
5
5
to delay the start of a
6
7
to add rinsing phases to
7
8
to add the stain and/or
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high lev-
el of soil.
The set of this function increases
the programme duration.
5.9 Spin button
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
.
9