AEG L 87695 WD Manuel de l'utilisateur - Page 41

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG L 87695 WD. AEG L 87695 WD 44 pages.

Water-stop device

WATER DRAINAGE

There are different procedures to connect

the drain hose:

With the plastic hose guide.

The inlet hose has a water stop device.

This device prevents water leaks in the

hose because of its natural ageing. The

red sector in the window «A» shows this

fault .

If this occur, close the water tap and con-

tact the service centre to replace the

hose.

• On the edge of a sink.

• Make sure that the plastic guide cannot

move when the appliance drains. At-

tach the guide to the water tap or the

wall.

• To a stand pipe with vent-hole.

Refer to the illustration. Directly into a

drain pipe at a height of not less than

60 cm and not more than 100 cm. The

end of the drain hose must always be

ventilated , i.e. the inner diameter of

the drainpipe must be larger than the

external diameter of the drain hose.

ENGLISH