Fujitsu ScanPartner 15C Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu ScanPartner 15C. Fujitsu ScanPartner 15C 23 pages. Image scanner
Également pour Fujitsu ScanPartner 15C : Spécifications (2 pages), Manuel de mise à jour (6 pages), Manuel de l'utilisateur (26 pages), Instructions de remplacement et de nettoyage des consommables (7 pages), Procédures d'installation (5 pages)

Question: Paper becomes skewed in the Scanner.

Answer:

a) Check the feeding roller condition; do the cleaning if

necessary. (See Section 3.1)

b) Use the paper guide when feeding the paper.

Question: When I power on the Scanner, it makes noises and

stand ready.

Answer:

There are two possibilities:

a) You forgot to remove the shipping retainer from the Scanner.

Please remove the shipping retainer first.

b) You did not place the Scanner on a flat desktop

This may cause the Scanner to function improperly.

Question: When I power on the Scanner, the lamp does not light.

Answer:

The possibilities are as follows:

a) The lamp is out of order. In that case, contact your

authorized local dealer to change the lamp. The life time of the

lamp is about 5000 hours.

b) The fuse on main board of the Scanner is burned. Check the

main board of the Scanner. If the fuse is burned, put in a new

fuse that is 250V/2A.

c) If the fuse burns again after the changing, it means the

invertor of the lamp is burned. Contact your authorized local

dealer to replace the invertor.

Question: Getting image from the Scanner is not a problem, but when

scanning, the Scanner or system will often crash.

Answer:

Please check

a) If the cable is firmly seated;

b) Only two SCSI terminators can be connected to your SCSI daisy

chain. One is at the end of the SCSI device, another is already in

your host adapter.

Question: While scanning, the Scanner often makes

back and forth.

Answer:

Please choose lower speed from the TWAIN user interface for

low speed PC.

4-2

will not

surface.

noises, or it scans