Brother MFC 795CW - Color Inkjet - All-in-One Manuel d'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Brother MFC 795CW - Color Inkjet - All-in-One. Brother MFC 795CW - Color Inkjet - All-in-One 47 pages. Quick setup guide - spanish
Également pour Brother MFC 795CW - Color Inkjet - All-in-One : Liste de référence des pièces (32 pages), (anglais) Quick Configuration Guide (46 pages)
Imprimer la page
11
Set your Station ID
You should store your name and fax number to be
printed on all fax pages that you send.
a
Press MENU.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Station ID.
e
Press Station ID.
f
Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
g
Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
To enter numbers or special letters, press
repeatedly until the character you want to enter
appears, then press the character you want to
use.
Note
• If you need to enter a character that is on the
same button as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press
h
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
For details, see Entering Text in Appendix C
of the User's Guide.
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless
such messages clearly contain, in a margin at the
top or bottom of each transmitted page, or on the
first page of the transmission, the date and time it
is sent and an identification of the business or
other entity or other individual sending the
message and the telephone number of the
sending machines or such business, other entity
or individual.
10
.
12
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Printing
Reports in Chapter 10 of the User's Guide.
13
Set tone or pulse dialing
mode
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
a
Press MENU.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Tone/Pulse.
e
Press Tone/Pulse.
f
Press Pulse (or Tone).
g
Press Stop/Exit.