Fujitsu ETERNUS DX8700 S2 Manuel de l'utilisateur - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu ETERNUS DX8700 S2. Fujitsu ETERNUS DX8700 S2 42 pages. Disk storage system settings
Également pour Fujitsu ETERNUS DX8700 S2 : Manuel de l'utilisateur (35 pages), Manuel de configuration (28 pages), Manuel de configuration (15 pages)
Imprimer la page
Chapter 6
Setting Up the VMware ESX Server
6.1
For VMware vSphere
5
Confirm that the [Enabled] checkbox is selected under "Status" on the [General] tab and click [Config-
ure] again.
6
Confirm that the iSCSI name is displayed in the "iSCSI Name" column and click the [Cancel] button.
7
Select the [Dynamic Discovery] tab and click the [Add] button.
8
Enter the IP address for the iSCSI port of the connected ETERNUS DX Disk storage system as the iSCSI
server IP address, confirm that the port is set to "Port 3260" (default), and click the [OK] button.
9
Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage system is displayed as
follows.
10
If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, repeat the IP address addi-
tion process for each iSCSI port. (Repeat
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
Step 7
through
Step
24
Copyright 2013 FUJITSU LIMITED
9.)
®
ESX
P3AM-3412-13ENZ0