Fujitsu P3810K Manuel de l'opérateur - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Fujitsu P3810K. Fujitsu P3810K 47 pages.

For fi-8150/fi-8150U

Turn off the scanner if it is on.

On the operator panel, hold down the [Function] button and press the [Power] button.

Keep holding down the [Function] button.

When "b" is displayed after "P" in the Function Number Display, release the [Function] button.

Load blank documents in the scanner.

When you load one blank document, you can check the result of Print Pattern 1 only.

Load multiple blank documents to check the results of some print patterns.

For details about print patterns, refer to

HINT

● Use an A4 or Letter size blank sheet.

If the paper size is smaller than A4 or Letter, printing may not complete successfully.

● Make sure that the print cartridge holder is positioned within the document width.

Press the [Scan/Stop] button.

One blank sheet is fed into the scanner, and the imprinter will print out a print pattern leaving a 5 mm gap

(with an allowance of 4 mm inwards or outwards) from the edge of the document.

Print Patterns and the Results (page

Installation

22).