Fujitsu ScanPartner 620C Procédures d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Procédures d'installation pour {nom_de_la_catégorie} Fujitsu ScanPartner 620C. Fujitsu ScanPartner 620C 5 pages. Image scanner
Également pour Fujitsu ScanPartner 620C : Spécifications (2 pages), Manuel de l'utilisateur (28 pages), Instructions de remplacement et de nettoyage des consommables (7 pages)

ScanPartner15C\600C\620C\93GX\3091DC\3092DC

Win95\98\ME Installation Procedure

Connecting SCSI cable: Included with the ScanPartner is a SCSI cable used to connect

the scanner to the host adapter. Located on the back of the scanner are 2 SCSI ports,

one 50-pin centronics and one DB25-pin. The SP93GX has two 50-pin centronics ports.

Use the cable provided to connect to the 50-pin centronics port and the DB25-pin port on

the SCSI controller. The SP3091\3092DC's have 2 High Density (HD) 50-pin

connectors. Ensure all connections are securely fastened.

WARNING! DO NOT connect the scanner to the parallel port on the workstation. Doing

so may damage the scanner).

Powering On: For proper communication between the Scanner and the Workstation,

switch on the scanner prior to switching on the workstation. The power, ready and paper

jam LED will all light up, afterwards the scanner will complete its self initialization and the

paper jam light will go off in approximately 10 seconds. The SP93GX power LED will

flash and then go solid. The SP3091\3092DC's will flash a P, 0, and then 1.

Bootup the system: When the New Hardware wizard comes up, allow it to search your

system for the scanner. Next, when you get the no device driver found message, select

finish. SPECIAL NOTE: There is no INF file at this time, therefore the scanner will be

placed under "other devices" with a "?" in device manager. This is normal.

Step E: Installing the ISIS driver.

1. Create a new folder and name it ISIS Download.

2. Next go to our Web page -

www.fcpa.com

and click on Support & Downloads.

3. In the sub frame under the Product Support column click on Scanners.

4. On the next page select Drivers and Downloads.

5. Afterwards click on ISIS Software Drivers.

6. Locate the appropriate ISIS driver for your scanner by cross-referencing the scanner

model column on the left to the software column.

7. Double click on the driver file name and the File Download box will popup.

Rev050404A