Brother DSMOBILE 600 Manuel de l'utilisateur - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Brother DSMOBILE 600. Brother DSMOBILE 600 42 pages. Users manual - english
Également pour Brother DSMOBILE 600 : Spécifications techniques (2 pages), Manuel de l'utilisateur (44 pages)
Imprimer la page
Calibrating your DSmobile 600 Scanner using "Image Capture."
Calibration is a critical step in setting up your scanner. It allows the scanned color data
to be "calibrated" to your computer and scanner combination for best image quality. If
at any time you switch the computer that you use with your scanner or change scanners,
you will need to calibrate again.
The following steps guide you through calibration of your DSmobile 600 scanner using the
built-in "Image Capture" software on your Mac OS X along with the Brother driver and
GUI. Note that once a calibration is performed, it does not need to be re-done if you use to
another application on the same computer.
®
Leopard
(Mac OS X v10.5)
1.
Install the DSmobile 600 scanner driver using the Installation CD and restart your
computer.
2.
Connect the scanner to your computer's USB port.
3.
Open the Applications folder and run "Image Capture" (See Figure 1).
4.
Close the "DSmobile 600" window.
5.
From the "Devices" menu, choose "Browse Devices" (See Figure 2).
Figure 1. Leopard Image Capture Window
- 20 -