Fujitsu D3654 Series Brève description - Page 26

Parcourez en ligne ou téléchargez le pdf Brève description pour {nom_de_la_catégorie} Fujitsu D3654 Series. Fujitsu D3654 Series 29 pages.

6 - English

Procedure

The processor socket is covered with a protective cap to protect the spring

contacts In the event of a warranty case, the mainboard can only be taken back

by Fujitsu Technology Solutions with the protective cap secured!

Please note that, depending on the heat sink used, different heat sink

mounts are required on the mainboard.

► Depending on the conﬁguration variant, you must pull a protective foil off the heat sink

or coat the heat sink with heat conducting paste before ﬁtting it.

► Secure the heat sink - depending on the model - with four screws or push it into the mounts.

► Remove the heat sink.

► Press down the lever and unhook it.

► Fold up the frame.

► Remove the protective cap and keep it.

► Hold the processor between your thumb

and index ﬁnger and insert it into the socket

(b) so that the marking of the processor is

aligned with the marking on the socket (a).

► Press the lever downward until it is

hooked in again.

Installing/removing the processor

Fujitsu