Indesit IDL 535 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Indesit IDL 535. Indesit IDL 535 17 pages. Indesit dishwasher installation and use manual
Également pour Indesit IDL 535 : Manuel d'installation et d'utilisation (17 pages), Manuel d'installation et d'utilisation (17 pages), Manuel d'installation et d'utilisation (16 pages)

Detergent and Rinse Aid ....

Detergent specifically intended for use with dishwashers

must be used. The dispenser must be refilled before the

start of each wash cycle following the instructions provided

in the "Wash Cycle Table." The detergent dispenser is located

on the inside panel of the door.

To open lid "A", press button "B". The cleaning detergent

should be introduced into the two containers "C"and "D"

up to the rim.

After pouring in the detergent, replace the lid, pressing down

until it clicks.

Dishwasher detergent in tablets is now available on the

market, in which case you should place one tablet into

container "D" and replace the lid.

To obtain the best results from each washing and drying

cycle, powder detergent, rinse aid liquid and salt should be

used.

Attention

All manuals and user guides at all-guides.com

This product makes dishes sparkle more as it improves their

drying. The rinse aid container is situated on the inside of the

appliance door; you should refill it when you see the container

is empty by means of indicator D.

To open the dispenser, turn the "C" cap in the anti-clockwise

direction and then pour in the rinse aid, making sure not to

overfill. The amount of rinse aid used for each cycle can be

regulated by turning the "F" dose adjustor, located beneath

the "C" cap, with a screwdriver. There are 6 different settings;

the normal dosage setting is 4.

Proper dosage of the rinse aid improves drying.

If drops of water remain on the dishes or spotting occurs, the

dosage adjustor should be turned to a higher setting. If the

dishes have white streaks, turn the dosage adjustor to a lower

setting.