AEG ATB81121AX Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG ATB81121AX. AEG ATB81121AX 16 pages.

Imprimer la page

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only

be guaranteed within the

specified temperature

range. If you have any

doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

8.2 Levelling

When placing the appliance ensure that

it stands level. This can be achieved by

two adjustable feet at the bottom in

front.

8.3 Location

It must be possible to

disconnect the appliance

from the mains power

supply; the plug must

therefore be easily

accessible after installation.

The appliance should be installed well

away from sources of heat such as

radiators, boilers, direct sunlight etc.

Ensure that air can circulate freely around

the back of the cabinet. To ensure best

performance, if the appliance is

positioned below an overhanging wall

unit, the minimum distance between the

top of the cabinet and the wall unit must

be at least 100 mm . Ideally, however, the

appliance should not be positioned

below overhanging wall units. Accurate

levelling is ensured by one or more

adjustable feet at the base of the

cabinet.

100 mm

15 mm

8.4 Door reversibility

WARNING!

Before carrying out any

operations, remove the plug

from the power socket.

CAUTION!

To carry out the following

operations, we suggest that

this be made with another

person that will keep a firm

hold on the doors of the

appliance during the

operations.

1. Tilt back the appliance carefully so

that the compressor cannot touch

the floor.

2. Unscrew both adjustable feet.

3. Unscrew the screws of the door

bottom hinge.

4. Take off the appliance door by

pulling it slightly downwards.

ENGLISH

15 mm