AEG TR938H2C Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG TR938H2C. AEG TR938H2C 36 pages.

Imprimer la page

3. Touch and hold down + Proti

pomačkání button by around 3

seconds.

The symbol

appears on the display.

4. To deactivate the child lock, touch

the above button again until the

symbol disappears.

8.8 Starting a program

To start the program:

Touch the Start/Pauza button.

The appliance starts and the LED above

the button stops flashing and stays on.

8.9 The ProSense load

detection

The ProSense The

ProSense technology

detects the laundry load size

defining the programme

duration.

After setting a drying programme, the

icon lights up on the display

if the programme supports it.

Touching the Start/Pauza button, the

ProSense starts the laundry load

detection:

1. The appliance detects the load in the

first minute: the indicator flashes, the

bars under the icon move back and

forth

and the drum rotates

shortly.

2. When the drum stops rotating, the

display shows the new programme

duration adjusted according to the

detected load. The number of bars,

from 1 to 4, represents the estimated

load amount. 4 bars represent the

maximum load amount for the

selected programme.

In case of drum overload,

the maximum declared load

indicator comes on again

with the

blinking. In this case, during

these 30 seconds, it is

possible to open the door

and remove the exceeding

garments. Once removed,

touch the Start/Pauza button

to start the programme

again. If the laundry amount

will not be reduced, the

programme starts anyway.

In this case, it will be not

possible to guarantee the

best results.

8.10 Program change

To change a program:

1. Push the Zap./Vyp. button to turn the

appliance off.

2. Push the Zap./Vyp. button again to

turn on the appliance.

3. Set a new program.

8.11 Programme end

Clean the filter and drain the

water container after each

drying cycle. (See chapter

CARE AND CLEANING.)

If the drying cycle is finished, the symbol

appears on the display. If the Signál

option is activated, the acoustic signal

sounds intermittently for 1 minute.

If you do not turn off the

appliance, the anti-crease

phase starts (not active with

all programmes). Flashing

symbol signals the

execution of the anti-crease

phase. Laundry can be

removed during this phase.

To remove the laundry:

1. Push the Zap./Vyp. button for 2

seconds to turn the appliance off.

2. Open the appliance door.

ENGLISH

indicator