a-TroniX Jump starter Booster 12V 4000A Manuel d'instruction - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} a-TroniX Jump starter Booster 12V 4000A. a-TroniX Jump starter Booster 12V 4000A 15 pages.
Imprimer la page
Instruction Manual
Jump starter Booster 12V 4000A
9. Error warnings
One of the following fonts appears on the display with the „Error" LED on the switch.
Check for the following possible errors:
Error
Description
Err 1
REVERSED POLARITY / SHORT-CIRCUIT / BATTERY IS DAMAGED /
STARTER IS NOT CONNECTED
Err 2
VOLTAGE IS INCORRECT (e.g. YOU ARE CONNECTED TO A 24V BATTERY)
Err 3
HIGH TEMPERATURE IN 12V INTERNAL BATTERY (Lithium LiFePO4)
Err 4
12V INTERNAL BATTERY IS FLAT (Lithium LiFePO4)
Err 5
9V ADDITIONAL BATTERY IS FLAT
Err 6
OVERLOAD IN START MODE
Err 7
OVERLOAD IN MEMORY SAVER MODE
10. Environment
The device is marked with the recycling symbol. This means that the product must be
disposed of separately at suitable collection points at the end of its service life and not
together with normal household waste.
The batteries can be recharged many times. Dispose of them at the end of
■
their service life in accordance with environmental standards.
The batteries must be disposed of properly.
Do not throw them in the trash.
Make use of the certified and professional recycling service
of our AKKU SYS team.
For more information, contact us at hotline +49 4101/376760,
at
Do not short circuit the battery terminals.
If possible, operate the device so that the battery is completely discharged
■
before disposal.
The packaging is recyclable. Please keep this after unpacking for reuse or
■
dispose of it properly.
Starters only need to be charged regularly (as described in these instructions)
using the charger supplied. Improper maintenance of the batteries will void the
guarantee. If the jump starter is sent in for repair, always include this manual with
the recorded charging data.
09/2021
or use the QR code.
Page 13