a-TroniX Jump starter Booster 12V 4000A Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} a-TroniX Jump starter Booster 12V 4000A. a-TroniX Jump starter Booster 12V 4000A 15 pages.

a-TroniX Jump starter Booster 12V 4000A Manuel d'instruction
Instruction Manual
Jump starter Booster 12V 4000A
This product contains a lithium-ion battery. In the event of a fire, you can use water
or a CO
extinguisher to put out the fire. Once the fire is out, extinguish the product
2
with water, a water-based extinguishing agent, or other non-alcoholic liquid to cool the
product and prevent the battery from re-igniting. NEVER try to pick up or move a hot,
smoking, or burning product as you could injure yourself.

3. Correct use of the jump starter

The Emergency Starter is designed to start vehicles with 12 V lead-acid batteries. Do not
use it for any other purpose.
Do not start or charge batteries with voltages that differ from the voltages specified for
the starter.
CAUTION:
Voltage incompatibility between the emergency starter and the voltage of the
vehicle electrical system can lead to explosions and damage the vehicle, the
product and people.
Use as a battery charger is not permitted.
Do not insert any objects into the slots or other openings on the surface of the device.
Use that does not comply with the technical regulations contained in the
SPECIFICATION table is not permitted;
Do not start batteries with voltages other than those given in the SPECIFICATION table.
Do not expose the device to rain or snow.
Avoid using the device in damp, wet or weathered environments;
Use for all applications that are not listed here is not permitted.
Do not start or charge non-rechargeable batteries.
Do not start or charge frozen batteries.
Turn off the vehicle lights and all other accessories before starting the engine.
CAUTION:
Never bring the poles of the two battery terminals (red-positive and black-
negative) into contact with one another.
CAUTION:
Never reverse the polarity. Always connect the output conductor with the red
battery terminal (+) to the positive pole of the battery and the output conductor
with the black battery terminal (-) to the vehicle earth (ground).
09/2021
Page 7