Aqua Medic DC Runner 1.2 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Aqua Medic DC Runner 1.2. Aqua Medic DC Runner 1.2 4 pages.

There is an automatic shut off if there is no water for 2 minutes. Pull the plug and then re-insert it

to take the controller back into operation. Controller, plugs and sockets have to be kept dry.

0 - 10 V: The pumps must be operated with at least 60% power, otherwise damage will occur. Short

pulse rates are not possible due to the start-up delay on the pumps.

Press the FEED button until 4 LEDs (Fig. 4, No. 2) light up in the middle to activate the 0 - 10 V

socket. In the same way, the 0 - 10 V output can be deactivated again.

Fig. 4: DC Runner Controller

1. Feed button

3. Power supply

2. LEDs

4. 0 - 10 V socket

By keeping the minus and FEED buttons pressed and hold until the LEDs flash once, the keyboard

of the controller can be locked or unlocked.

5. Maintenance / Cleaning

From time to time, the pump needs to be cleaned. For cleaning, do the following:

First of all, remove

the bottom plate. Then, turn the basket and take it off the pump. Now, the complete impeller can be

taken out.

It can be cleaned under running water and then be

re-assembled. When assembling, make

sure that the ceramic shaft of the impeller goes into the socket of the respective bearing.

6. Failures

The pump is designed to have a low maintenance requirement and under normal conditions will be

very reliable, provided it is protected from contamination. If the pump gets noisy, the suction basket

and the propeller need to be cleaned or the impeller and bearings need to be replaced.

7. Warranty

Should any defect in materials or workmanship be found within 24 months of the date of purchase

AB Aqua Medic undertakes to repair, or at our option replace, the defective part free of charge –

always provided the product has been installed correctly, is used for the purpose that was intended

by us, is used in accordance with the operating instructions and is returned to us carriage paid. Proof

of Purchase is required by presentation of the original invoice or receipt indicating the dealer's name,

the model number and date of purchase. This warranty may not apply if any model or production

number has been altered, deleted or removed, unauthorised persons or organisations have executed

repairs, modifications or alterations, or damage is caused by accident, misuse or neglect. Please note

that the product is not defective under the terms of this warranty where the product, or any of its

component parts, was not originally designed and / or manufactured for the market in which it is

used. These statements do not affect your statutory rights as a customer.

AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany

- Technical changes reserved – 03/2018

Current manuals are available for download at www.aqua-medic.de.