Aqua One AquaLED 100 Manuel d'instructions - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Aqua One AquaLED 100. Aqua One AquaLED 100 8 pages. Inspiring excellence in fish care
Imprimer la page
Troubleshooting
If you are in any doubt about the electrical
installation or safety of this product you must
consult a qualifi ed electrician.
LIGHT UNIT DOES NOT WORK
1. Check if its is plugged into the power supply and
the switch is on.
2. The fully submersible LED strip is fi tted to the inside
of the aquarium hood using a nontoxic adhesive.
Removing this if needed to exchange is facilitated by
using a blunt blade to prise it away from the hood.
A replacement can be glued in using a suitable
nontoxic glue or non-toxic silicone. Please ensure the
hood is removed from the aquarium before doing this
and any adhesive used is allowed to completely dry
before being returned to the aquarium.
AQUARIUM POSSIBLY LEAKING
1. Make sure your fi lter spray bar holes are pointed
down onto the aquarium.
2. If an air stone is being used check it is not bubbling
water over the rim of the aquarium if so turn the air
pump down.
3. Make sure the aquarium is sitting on a level
surface.
4. If it is a salt water aquarium remove any salt creep
as it can drain water from the aquarium.
5a. Lift the lid and remove the fi lter unit from the
top of the aquarium. Mark the water level. Remove
any excess water that may be sitting on the edge of
the aquarium. Leave for an hour. If water level drops
proceed to step 5b.
5b. Remove the fi sh, decorations and gravel. Empty
the aquarium and clean the glass DO NOT WASH
IN SOAP OR DETERGENT. Place a piece of
newspaper on a fl at level solid surface. Carefully fi ll
the aquarium ensuring not to spill any water on to the
newspaper. Leave the aquarium for several hours
and then inspect the newspaper for wet patches.
Specifi cations
Aquarium Model: AquaLED 45
Dimensions: 51 x 35 x 29cm
Aquarium Volume: 45L
Filter Flow Rate: 320L/Hr
Light Wattage: 3.84W LED
Power Requirements: 220 - 240V
Suitable: Coldwater
Aquarium Model: AquaLED 68
Dimensions: 60 x 31 x 42cm
Aquarium Volume: 68L
Filter Flow Rate: 320L/Hr
Light Wattage: 4.32W LED
Power Requirements: 220 - 240V
Suitable: Coldwater, Tropical
Aquarium Model: AquaLED 100
Dimensions: 80 x 31 x 47cm
Aquarium Volume: 100L
Filter Flow Rate: 700L/Hr
Light Wattage: 6.24W LED
Power Requirements: 220 - 240V
Suitable: Coldwater, Tropical
6