Dell PowerEdge XL 5133-4 Manuel de démarrage - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Dell PowerEdge XL 5133-4. Dell PowerEdge XL 5133-4 38 pages. Dell poweredge m i/o aggregator getting started guide

Imprimer la page

1. Internal Ports

2 At the EXEC mode prompt, enter enable. At the EXEC Privilege prompt,

enter configure to reach the configuration command mode.

FTOS> enable

FTOS# configure

FTOS(conf)#

3 (CLI only) At the configuration mode prompt, enter the hostname name

command to configure a hostname for the Aggregator, where name is a text

string of up to 20 alphanumeric characters.

Host names must start with a letter and end with a letter or number.

Characters within the string can be letters, numbers, and hyphens.

FTOS(conf)# hostname Aggregator1

FTOS(conf)#

4 (CMC-supported) To reconfigure the default username and password,

enter the username name password password command, where name is a

string of up to 63 alphanumeric characters and password is a string of up to

32 characters. Both values are case sensitive; spaces are supported.

FTOS(conf)# username admin password dellAgg1

FTOS(conf)#

5 (CLI only) At power up, the default VLAN for all ports is VLAN 1. To

reconfigure the default VLAN, enter the default vlan vlan-id command;

for example:

FTOS(conf)# default vlan 3

6 (CMC-supported) To reconfigure the SNMP community name used for

read-only management access to the switch, enter the snmp-server

community name ro command, where name is a text string of up to 20

alphanumeric characters and ro specifies read-only permission.

FTOS(conf)# snmp-server community dellSNMP ro

7 (CMC-supported) By default, the IP address and subnet mask of the out-

of-band management interface used for remote SNMP or Telnet access is

assigned by a DHCP server. You can reconfigure the default setting by

specifying an IP address with the following commands:

interface ManagementEthernet slot/port, where is slot is 0-1 and port is 0.

ip address ip-address/mask, where ip-address is in dotted-decimal format

(A.B.C.D) and mask is a subnet mask in /prefix-length format (/xx).

no shutdown enables the interface.

Installing and Configuring the Aggregator