Dell S4048-ON Manuel de dépannage - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Dell S4048-ON. Dell S4048-ON 29 pages. Enterprise switches
Également pour Dell S4048-ON : Manuel de configuration (19 pages), Manuel de configuration (30 pages)

Imprimer la page

INSTALLER-DND-SK-1.0

INSTALLER-DND-SK-1.0 100% |*******************************| 27115k

ONIE: Executing installer: tftp://172.27.1.176/INSTALLER-DND-SK-x.x.x.x.bin

Verifying image checksum ... OK.

Preparing image archive from /installer ... Done.

Mounting /dev/sda3...Done.

Copying Images ...Done.

Installing Menu Entry ...Done

All Done

ONIE:/ # umount: can't remount rootfs read-only

The system is going down NOW!

Sent SIGTERM to all processes

Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache

Restarting system.

machine restart

After installing the diagnostic image, a new entry (DELL EMC DIAG) is added to the ONIE boot menu.

Select the DELL EMC DIAG option to boot the Diagnostics image.

NOTE:

When you update ONIE, the DELL EMC DIAG option is removed. To recreate the DELL EMC DIAG option in the

menu, you must install the Dell Diag Entry updater, as shown in the following example.

ONIE:/ #

ONIE:/ # onie-nos-install tftp://xx.xx.xxx.xx/DND-SK-DELL-DIAG-ENTRY-UPDATER

Stopping: discover... done.

Info: Fetching tftp://xx.xx.xxx.xx/DND-SK-DELL-DIAG-ENTRY-UPDATER ...

DND-SK-DELL-DIAG-ENT 100% |*******************************| 15371

ONIE: Executing installer: tftp://10.16.127.35/DND-SK-DELL-DIAG-ENTRY-UPDATER

Verifying image checksum ... OK.

Preparing image archive from /installer ... Done.

Installing Menu Entry ...Done.

ONIE:/ # umount: can't remount rootfs read-only

The system is going down NOW!

Sent SIGTERM to all processes

Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache

Restarting system.

machine restart

Dell EMC diagnostic test suite

To run the Dell EMC diagnostic test suite, use the following command.

Use the following step after the system boots up.

To run the Dell EMC diagnostic test suite, select the DELL EMC DIAG option.

NOTE:

Use the up and down arrow keys to select which entry is highlighted. Press Enter to select an operating software-

selected OS or enter e to edit the commands before booting. Enter c for a command line. The highlighted entry (*)

executes automatically in the operating system.

Dell EMC diagnostics

22% |******

31% |*********

40% |************

48% |**************

56% |*****************

66% |********************

75% |***********************

84% |**************************

92% |****************************

6050k

0:00:10 ETA

8625k

0:00:08 ETA

| 10986k

0:00:07 ETA

| 13062k

0:00:06 ETA

| 15268k

0:00:05 ETA

| 18026k

0:00:04 ETA

| 20535k

0:00:02 ETA

| 22803k

0:00:01 ETA

| 25063k

0:00:00 ETA