Award WO450S Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Award WO450S. Award WO450S 19 pages.
Imprimer la pageAfter making the electrical connections,
insert the oven into the joinery by pushing
it forward. Open the oven door and insert 2
screws in the holes located on the oven
frame. While the oven frame touches the
wooden surface of the joinery , tighten the
screws.
WARNING: The electrical connection
of this oven should be carried out by
an authorised service person or
qualified electrician, according to the
instructions in this guide and in compliance
with the current local regulations.
WARNING: THE OVEN MUST BE
EARTHED.
•
Before connecting the oven to the power
supply, the voltage rating of the oven
(stamped on the oven identification
plate) must be checked for
correspondence to the available mains
supply voltage, and the mains electric
wiring should be capable of handling the
oven power rating (also indicated on the
identification plate).
•
During installation, please ensure that
isolated cables are used. An incorrect
connection could damage your oven. If
the mains cable is damaged and needs
to be replaced this should be done by a
qualified personnel.
•
Do not use adaptors, multiple sockets
and/or extension leads.
•
The supply cord should be kept away
from hot parts of the oven and must not
be bent or compressed. Otherwise the
cord may be damaged, causing a short
circuit.
If the oven is not connected
•
to the mains with a plug, a all-pole
disconnector (with at least 3 mm contact
spacing must be used in order to meet
the safety regulations.
•
The oven is designed for a power
supply of 220-240V ~ and 380-415V
3N~. If your supply is different, contact
the authorised service person or a
qualified electrician.
•
The power cable (H05VV-F) must be
long enough to be connected to the
oven, even if the oven stands on the
front of its joinery .
•
Ensure all connections are adequately
tightened.
•
Fix the supply cable in the cable clamp
and then close the cover.
•
The terminal box connection is placed
on the terminal box.
Brown
EN - 10
Blue
Yellow+Green