Miele DA 316 i Manuel d'utilisation et d'installation - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 316 i. Miele DA 316 i 40 pages. For cooker hood

Imprimer la page

The appliance is designed for vent

ducting ø 150 mm.

If ø 125 mm is required:

Place the reducing collar supplied

on the vent socket and turn it to se-

cure it in position (see "Connection

for air extraction").

If ø 100 mm is required:

Fit the ø 125 mm reducing collar

onto the vent socket. Then fit the ø

100 reducing collar over it (see "Con-

nection for air extraction").

Place the reducing collar for ø 125

mm on the vent socket as described

previously.

Now fit the two runners into the wall unit.

The positioning will depend on the type

of lightshield being fitted.

Appliance fitted with a DFB lightshield:

Draw a vertical line approx. 20 cm

long on both the left and right sides

of the wall unit 100 mm in from the

front edge (see illustration).