HP 6000 - ProLiant - 128 MB RAM Manuel de l'utilitaire de configuration - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilitaire de configuration pour {nom_de_la_catégorie} HP 6000 - ProLiant - 128 MB RAM. HP 6000 - ProLiant - 128 MB RAM 19 pages. F10 utility business pcs
Également pour HP 6000 - ProLiant - 128 MB RAM : Manuel de l'utilisateur (20 pages), Support List (34 pages)
Imprimer la page
Computer Setup—Advanced
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 6
Computer Setup—Advanced (for advanced users)
Option
Power-On Options
10
Computer Setup (F10) Utility
Description
Allows you to set:
●
POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days).
◦
QuickBoot = Do not clear memory or perform a memory test.
◦
FullBoot = Memory test (count) on cold boot. Clears memory on all boots.
◦
Clear Memory = No memory count on cold boot. Clears memory on all boots.
◦
FullBoot Every x Days = Memory count on 1st cold boot on or after the xth day. No more
memory counts until 1st cold boot on or after x days. Clears memory on all boots.
●
POST messages (enable/disable).
●
F9
prompt (hidden/displayed). Enabling this feature will display the text F9 = Boot Menu during
POST. Disabling this feature prevents the text from being displayed. However, pressing
still access the Shortcut Boot [Order] Menu screen. See Storage > Boot Order for more
information.
●
F10
prompt (hidden/displayed). Enabling this feature will display the text F10 = Setup during
POST. Disabling this feature prevents the text from being displayed. However, pressing
will still access the Setup screen.
●
F11
prompt (hidden/displayed). Setting this feature to displayed will display the text F11 =
Recovery during POST. Hiding the feature prevents the text from being displayed. However,
pressing
F11
will still attempt to boot to the recovery partition. See Factory Recovery Boot
Support for more information.
●
F12
prompt (hidden/displayed). Enabling this feature will display the text F12 = Network during
POST. Disabling this feature prevents the text from being displayed. However, pressing
will still force the system to attempt booting from the network.
●
Factory Recovery Boot Support (enable/disable). Enabling this feature will cause an additional
prompt, F11 = Recovery, to be displayed during POST on systems with a recovery partition
on the boot hard drive. Pressing
F11 = Recovery prompt can be hidden with the F11 prompt (hidden/displayed) option (see
above).
●
Option ROM prompt (enable/disable). Enabling this feature will cause the system to display a
message before loading option ROMs. (This feature is supported on some models only.)
●
Remote wakeup boot source (remote server/local hard drive).
●
After Power Loss (off/on/previous state): Setting this option to:
◦
Off—causes the computer to remain powered off when power is restored.
◦
On—causes the computer to power on automatically as soon as power is restored.
◦
Previous state—causes the computer to power on automatically as soon as power is
restored, if it was on when power was lost.
F11
causes the system to boot to the recovery partition. The
F9
will
F10
F12
ENWW