ALLO STM Manuel d'installation rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} ALLO STM. ALLO STM 11 pages. Sip threat manager
Également pour ALLO STM : Manuel d'installation rapide (9 pages)

Imprimer la page

STM Quick Installation Guide

STM Appliance 1

The STM package includes:

1 STM Appliance

1 USB Power Adapter

1 Serial Console Cable

2 Ethernet Cables

3. Initial Setup & Configuration

1. Unpack the items from the box

2. Check that you have all the items listed in the package content.

3. Connect the LAN port of the STM to the PBX/VOIP Gateway.

4. Connect the WAN port of the STM to the untrusted/public network.

5. Connect the appliance to the power socket using the USB power cable.

6. The device will take about a minute to boot up & will be fully functional with the default

configuration.

Some of the PBX/Gateway devices may have an exclusive LAN/Mgmt Interface for device

management purpose other than the Data Interface (also referred as the WAN/Public Interface).

In such cases LAN port of the STM should be connected to the Data Interface (WAN/Public

Interface).

www.allo.com

Figure 5: Scenario 3

Version 2.0