ABB ACH580-01 Series Manuel d'instructions - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} ABB ACH580-01 Series. ABB ACH580-01 Series 7 pages. Base drive replacement
Également pour ABB ACH580-01 Series : Manuel (16 pages), Manuel d'installation et de démarrage rapide (17 pages), Manuel d'instructions (8 pages), Manuel d'installation et de démarrage rapide (17 pages), Manuel d'installation et de démarrage rapide (17 pages)

REPLACEMENT INSTRUCTIONS | ACH580-01 VXR UL TYPE 1 , R2/R3/R4

Step

Instruction

Cut zip ties

by pulling out the terminal block.

NOTE: Remove any additional drive I/O wiring.

R4 Frame: Remove zip ties securing the input and output wires to

the drive conduit plate.

R2 & R3 Frame: Using a PZ2 bit, loosen and remove wires from the

input and motor terminals of the drive.

R4 Frame: Using a T20 bit, loosen and remove wires from the input

and motor terminals of the drive.

Using a PZ3 bit, loosen and remove ground wire from the drive.

R2 Frame: Using a T20 bit, loosen and remove two (2) M4x8 screws.

Remove conduit assembly.

R3 Frame: Using a T20 bit, loosen and remove four (4) K40x12

screws. Remove conduit assembly.

R4 Frame: Using a T25 bit, loosen and remove four (4) M5x16

screws. Remove conduit assembly.

and disconnect the RS485 cable

Diagram

from the drive