ALLOWANCE 100 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ALLOWANCE 100. ALLOWANCE 100 15 pages. Television time manager

Imprimer la page

A parent may also use the TV Allowance to set up, change, or view: Child Access Code(s), the amount of time

remaining in a Weekly Time Allowance, the Time of Day, Lockout Intervals, the Weekly Time Allowance

Rollover feature and even the Master Parental Access Code. All these functions are done by entering the Master

Parental Access Code and then NOT pressing the ENTER key but instead pressing other keys.

SETTING UP THE TV ALLOWANCE

3.1. PHYSICAL SETUP

Once you take the TV Allowance out of the box you should:

(1) Turn off the TV and unplug it from the wall.

(2) Open the access door on the TV Allowance with the Security Key and insert three AAA alkaline batteries

in the battery compartment.

(3) Plug the TV into the socket found inside the access door of the TV Allowance.

(4) Close the access door on the TV Allowance and lock it using the Security Key.

(5) Plug the TV Allowance into the wall and follow the steps 2 through 5 below.

(6) Store the Security Keys and this manual in a safe and secure place. Make a copy of the Master Parental

Access Code in the space below and keep this code a secret:

MASTER PARENTAL ACCESS CODE ____________________

3.2. FLASHING "12:00" – SET CURRENT TIME AND DAY

The display will be blinking "12:00" after a new battery is inserted and the TV Allowance is plugged into the

wall. This indicates that the hours and minutes should be set. To set the time of day press four numbers

corresponding to the time of day, then press the ENTER key. The display will then blink the time of day together

with the AM LED. This indicates that morning /afternoon part of the time of day is to be set.

Pressing the ENTER key while the AM LED is on selects morning (am). Pressing the CLEAR key turns the

AM LED on and off. Pressing the ENTER key while the AM LED is not lit selects afternoon (pm). After

pressing the ENTER key to set morning or afternoon the display will blink "dAy". This indicates that the day of

the week should be set.

To set the day of the week press one of the keys 1,2,3,4,5,6, or 7, with day 1 corresponding to Monday, day 2 to

Tuesday, and so forth with day 7 corresponding to Sunday. After pressing one of the numbers 1 through 7 the

display will alternately blink "dAy" and that number. Next press the ENTER key. This completes the setting of

the time of day (See Note 4 for more about the day of the week).

As an example suppose the time of day is 9:15 AM Saturday, you would press the following keys:

Key(s) Pressed

0915 ENTER

ENTER

6 ENTER

3.3. FLASHING "PA" – SET MASTER PARENTAL CODE

Action Taken

This would cause the display to blink 9:15 AM

This would set the time to 9:15 AM, the display will blink "dAy".

This would set the day 6 as the current day (Saturday) and complete

the time of day setting. After the ENTER key that completed the

setting of the time of day is pressed the display will flash the letters

"PA". This indicates that the Master Parental Control Access Code

must be entered.