ALLOWANCE 100 Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ALLOWANCE 100. ALLOWANCE 100 15 pages. Television time manager
Imprimer la page0215 ENTER
Note: If you press CLEAR before you press ENTER and after you have entered some number or numbers then
the display flashes "A1" and you can begin to enter the hours and minutes of the weekly time allowance again.
4.3. FORCE KEY – CHANGE TIME REMAINING IN AN ALLOWANCE
To change the time remaining in a weekly time allowance press the FORCE key and one of the digits 1, 2, 3, or
4 corresponding to which child's time account is being changed. The display will blink "Fn" where n is a
number from 1 to 4, and the LED corresponding to that child will light up. You then enter the hours and minutes
of the time remaining in the time allowance and press the ENTER key. Please note that any changes made using
the FORCE key will change only the time remaining in the child's account and not the weekly time allowance.
The maximum amount of time that can be set as the time remaining in a Weekly Time Allowance is 99 hours
and 99 minutes.
If you make a mistake or wish to change the digits entered then keep pressing digits until the display shows the
access code you want to use and then press the ENTER key.
You may also press the CLEAR key to abort the entering of the hours and minutes, if you do this after you have
started entering numbers then the display flashes "Fn" and you are placed back into PARENT MODE.
For example if child one is to have 1 hours and 45 minutes of time left in his time allowance you would press
the following keys.
Key(s) Pressed
FORCE 1
0145 ENTER
4.4. LOOK KEY – LOOK AT ALLOWANCE, TIME REMAINING, & ACCESS CODE
While in Parent Mode, to view Weekly Time Allowances, Time Remaining in those allowances and Access
Codes for the allowances press LOOK key. The display will blink "L". This will cause the display to cycle
through the time allowance, time remaining in the allowance, and the access code for the child that corresponds
to the number entered. If you press ENTER or CLEAR instead of a number from 1 to 4 then the look function
exits and you are back in PARENT MODE.
As an example if you wanted to view child one's allowance, time remaining and access code you would press
the following keys (assume that the allowance for child one is 2 hours and 15 minutes, the time remaining in his
Note: If you press CLEAR or ENTER then the code function aborts
and you are back in parent mode.
2 hours and 15 minutes is set for child one's weekly time
allowance, the TV Allowance beeps and LED 1 goes out. The
Parent Light remains on.
Action Taken
The display blinks "F1", the TV Allowance beeps, and LED lights
up.
Note: If you press CLEAR or ENTER then the force function
aborts and you are back in parent mode.
1 hour and 45 minutes is set as the time remaining in child one's
weekly time allowance; press enter and the TV Allowance beeps.
The Parent light will remain on.
Note: If you press CLEAR before you press ENTER (after you
have entered some numbers) then the display flashes "F1" and you
can start over.