ALLOWANCE 100 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ALLOWANCE 100. ALLOWANCE 100 15 pages. Television time manager

Imprimer la page

account is 1 hour and 45 minutes, and his access code is 9999).

Key(s) Pressed

LOOK

4.5. CLEAR KEY – SET THE TIME OF DAY

To change the time of day press the CLEAR key while in PARENT mode. The display will blink "12:00". This

indicates that the hours and minutes should be set. To do this press the 4 digits corresponding to the time of day,

then press the ENTER key, the display will blink the time you entered together with the AM LED. This indicates

that the morning/afternoon part of the time of day should be set.

To set the AM LED (morning) press the ENTER key while the AM LED is lit. To set afternoon press the

CLEAR key until the AM LED is not lit and then press the ENTER key. The display will now blink "dAy" this

indicates that the day of the week should be set. Press the clear key gently or you will get a double clear (no

clear at all).

To set the day of the week press one of the keys 1, 2, 3, 4, 5, 6, or 7. Day 1 corresponds to Monday, day 2 to

Tuesday, and so forth with day 7 corresponding to Saturday. Next press the ENTER key. This completes the

setting of the time of day. (See Note 4 for more about the day of the week),

If you wish to abort the time function and not change the time of day press the CLEAR or ENTER key while the

display is flashing "12:00". If you press the CLEAR key after you have entered some or all of the numbers for

the hours and minutes of the time of day or after you have entered the day of the week then the display will go

back to flashing "12:00" or "dAy" and you can start over.

As an example suppose the time of day is 9:15 AM Saturday, you would press the following keys:

Key(s) Pressed

CLEAR

0915 ENTER

ENTER

Action Taken

The display blinks "L".

If you press ENTER or CLEAR instead of one of the numbers from

1 to 4 then the look function aborts and you are back in PARENT

mode 1.

The display alternately display's "A1" and "2:15" for a short time

indicating that child 1 has a 2 hour and 15 minute Weekly Time

Allowance. The display then alternately displays "F1" and "1:45"

for a short time, indicating that child one has one hour and forty

five minutes left in his allowance. The display then alternately

displays "C1" and "9999" for a short time, indicating that child

one's access code is 9999. The display then cycles back to "A1"

and "2:15". If during this cycle you press one of the numbers 1, 2,

3, or 4 the display will shift to that account and that LED will be lit.

Action Taken

The display blinks "12:00".

Note: If you press ENTER or CLEAR before you start entering

numbers then the time set function aborts.

After pressing ENTER the display will blink 9:15 along with the

AM LED.

Note: If you pressed CLEAR before you pressed the ENTER key

the display would flash "12:00" and you start over.

This will cause the display to leave on the AM LED (which sets the

time to 9:15AM) and then blink "dAy".