ABB ACS880-31 Manuel d'installation et de démarrage rapide - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de démarrage rapide pour {nom_de_la_catégorie} ABB ACS880-31. ABB ACS880-31 17 pages. Converter modules with electrolytic dc capacitors in the dc link
Également pour ABB ACS880-31 : Manuel (16 pages)
Imprimer la page
R6
R6
4.
Frame R8: Remove the EMC side plates (4b). For easier installation, you can remove the side plates.
4b
4b
5.
Prepare the power cables:
•
Remove the rubber grommets of the cables to be installed from the cable entry plate. Remove the unused grommets
and reinstall with the cone pointing down (5a).
•
Cut a sufficient hole in the rubber grommet. Slide the grommet onto the cable (5b) with the remaining cone pointing
down.
•
Prepare the ends of the input power cable and motor cable as illustrated in the applicable figure (5c).
•
Slide the cables through the holes in the cable entry and attach the grommets to the holes.
5a
4 × M5
3 N·m
(26 lbf·in)
R8
5c
5b
R8
R8
PE
3a
3 × M5
3 N·m
(26 lbf·in)
3a
5 × M5
3 N·m
(26 lbf·in)
R8
6 × M5
3 N·m
(26 lbf·in)
R8
PE
5