AllPondSolutions 1400PP Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AllPondSolutions 1400PP. AllPondSolutions 1400PP 13 pages. Pond & aquarium

Imprimer la page

TROUBLESHOOTING

Slow Flow Rate
Slow Flow Rate
1. For optimum function of the unit, we highly recommend the pump is
positioned on a brick, so it is not resting directly on the bottom on the pond. This
is to prevent large clumps of debris blocking the inlets and restricting the flow.
2. Follow the maintenance section. Ensure pipe work is not blocked, leaking or
is laid so that it gets crushed or kinked.
3. Locate the impeller and shaft in the pump and inspect for damage and clear
the fittings and parts of any waste build-up.
No Flow From Pump
1. Check power supply is on.
2. Check fuse and cable for any damage.
3. Follow the slow flow rate guide (see above) and keep any hose fittings to a
minimum. This helps to remove frictional loss of flow and so increases pump
flow rates.
My Unit is Cutting Out
1. For optimum function of the unit, we highly recommend the pump is
positioned on a brick, so it is not resting directly on the bottom on the pond. This
is to prevent large clumps of debris blocking the inlets and restricting the flow.
2. Ensure that all O-rings are in place and well lubricated.
3. Locate the impeller and shaft in the pump and inspect for damage and clear
the fittings and parts of any waste build-up.
If none of the above resolves your issue, or you require spare parts for your
pump, please contact the supplier of your unit.