ABB E-Hub 2.0 Pour commencer - Page 5

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} ABB E-Hub 2.0. ABB E-Hub 2.0 18 pages.

Imprimer la page

A R C H I T E C T U R E

As an example, the illustration below shows how to

wire the system with separation of interfaces be-

tween field devices and internet connection.

It is mandatory to use two different networks.

Internet cloud

Ethernet Switch

E-Hub 2.0

COM 0

XT6

XT4

COM

Note:

Although E-Hub 2.0 has built-in firewall feature to block initiative access from internet and allows only initiative to internet from E-Hub 2.0, it's

still recommended to deploy dedicated firewall between E-Hub 2.0 and internet. It is recommended to configure rate limiter either at device

level or network level depending on the requirement.

Disclaimer

It is the sole responsibility of the customer to

provide and continuously ensure a secure con-

nection between the product and the customer

network or any other network.

The customer is required to establish and main-

tain any appropriate measures (including but

not limited to the installation of firewalls, appli-

cation of authentication measures, encryption

of data, installation of anti- virus programs,

Ethernet Switch

ETH

COM 1

RS-485 1/2

XT2

COM

For internet connectivity you can use:

• ETH0

• Wi-Fi

• 3G/4G

ETH1 must be connected to LAN (field devices)

M4M

XT6

COM

etc.) to protect the product, the network, its

system and the interface against any kind of se-

curity breach, unauthorized access, interfer-

ence, intrusion, leakage and/or theft of data or

information.

ABB and its affiliates are not liable for damage

and/or losses related to such security breaches,

unauthorized access, interference, intrusion,

leakage and/or theft of data or information.

Emax 2

XT4

XT2

COM