Panasonic CT-27G33 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic CT-27G33. Panasonic CT-27G33 18 pages. 27" diagonal stereo monitor-receiver
Également pour Panasonic CT-27G33 : Manuel d'utilisation (36 pages), Manuel d'utilisation (17 pages)

Panasonic CT-27G33 Manuel d'utilisation
PICTURE
IN PICTURE
(PIP)
OPERATION
Picture In Picture (PIP) Operation
With / Without
A VCR And Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR).
Without
A VCR (External
Video Source)
Procedure
Connect incoming cable to antenna (ANT) input on back of TV.
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The audio
is for the Main Picture,
onl F
Choose
channels
for the PIP frame
by pressing
the Remote Control
PIP
CHANNEL up/down buttons.
Choose channels for the Main Picture by pressing the Remote Control OH
up/down buttons or by using the numeric keypad.
With A VCR (External Video Source) And Cable Box
Connect your television to a VCR and Cable Box, as shown,
TERMINALS
ON BACK OF TV
VCR
CABLE BOX
0
I
Incoming
Cable
Cable Splitter
(Not Supplied)
CABLES
NOT SUPPLIED
Note:
The Remote Control must be programmed
with suppfied codes to operate the VCR
and Cable Box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The audio is from the Main Picture only.
Note:
To view scrambled channels through your Cable Box in the PIP frame:
Press the TVNIDEO
button on the Remote Control to select the same video
input which your cable box is connected to.
Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.
Choose channels for the PIP frame by pressing the CBL button on the Remote
Control and using the numeric keypad or CH up/down buttons.
Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or OH up/down buttons.
The SWAP button switches the PIP and Main Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.
[]