AquaSure FORTITUDE PRO Series Manuel - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AquaSure FORTITUDE PRO Series. AquaSure FORTITUDE PRO Series 20 pages. Whole house water treatment system
Également pour AquaSure FORTITUDE PRO Series : Manuel du propriétaire (12 pages)

Imprimer la page

STEP 6.

Attaching the Water Supply Pipe to the Treatment System

1. Place the blue gasket in between the valve body

and the adapter. Screw the adapter into the

valve body.

2. Apply the same procedure to all three openings.

Note: Make sure the o-ring is inside the housing and do not over tightening the housing.

STEP 7.

Mounting the Valve Body onto the Media Tank

1. Apply a small amount of lubricant onto the

o-ring of the valve body. (Do not apply lubricant

on the thread.)

2. Lubricate the riser tube located on the opening

of the media tank. Make sure the riser tube is

flush with the top of the tank.

3. Install the upper basket on the bottom of the

valve by lining up the tabs, pressing in, then

turning the basket counterclockwise to lock it in

place.

AQUASUREUSA.com

Tel: 1-800-661-0680