AQUATECH Scout & Shadow Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AQUATECH Scout & Shadow. AQUATECH Scout & Shadow 4 pages. Sound blimp
Imprimer la pageClear LCD screen - allows you to view
images when required.
O-Ring grease – a small amount should be
applied to the threads. This will allow your
Tube to spin easier.
Pocket Wizard - With the removal of your
Two Button Switch, a Pocket Wizard
(which plugs in like a head phone jack)
can be installed allowing you to wirelessly
trigger your camera. This is set up only for
receiving a signal. Contact AquaTech for
transmitting a signal.
IMPORTANT:
Our Shadow & Scout
Sound Blimps are NOT waterproof
and should never be used in or
around the water.
For any technical questions please contact
Instructions
Thank you for purchasing the AquaTech
"Scout / Shadow" Sound Blimp.
For ease of use please remove all camera
straps before loading camera into blimp.
Carefully connect the electronic cable
release into your cameras cable release
jack. The cable release is field replaceable
and this part is sold via AquaTech directly.
Place your camera into the blimp without
a lens and secure the rear section of the
blimp with the quick action latch.
Attach your lens to your camera body and
test camera functions to ensure cable
release and rear controls are functioning
as desired.