Aquatic AQ-BC-6BT-X Manuel d'utilisation et d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Aquatic AQ-BC-6BT-X. Aquatic AQ-BC-6BT-X 14 pages. Bluecube 'hide-away' media player for bluetooth audio & mp3 devices

Imprimer la page

Getting Started

1.2.1 Connections Diagram

1.3 12-pin Harness Connection (retail packaged models only)

If your AQ-BC-6BT-X was purchased from an Aquatic AV dealer and/or supplied with retail

packaging it is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the

media player to power and speakers. Please proceed to section 1.3.1.

If your AQ-BC-6BT-X was supplied as a pre-installed waterproof entertainment system it will

utilise 3rd party wiring connections and is not supplied with the Aquatic AV 12-pin Harness.

Please proceed to section 1.4

1.3.1 12-pin Harness Wiring Diagram

All open wire connections should be soldered and protected against water and dust for best long-term performance.

*Retail packaged models only.

www.aquaticav.com

9. Bridge Mode Wire (magenta)

8. Power Attenuation Wires (1x white, 1x black)

7. Bluetooth Halo Aerial

Connector

Rear channel Bridge Mode (for subwoofer operation) is

selected when the magenta wire is cut. See section 1.7.

Rear channel Bridge

Mode (for subwoofer

operation) is selected

when the magenta wire

is cut. See section 1.7.

BlueCube Media Player AQ-BC-6BT-X

2. RCA Auxiliary Inputs

1. 12-pin Watertight Harness

3. RCA Auxiliary Outputs

4. Wired & Wireless Remote 8-pin DIN

Connectors (Black)

5. 12V DC Triggers (2x red, 2x red/black)

6. Power On LED

No lower than a 2 Ohm load, or 4

Ohm in bridged mode, should be

used or damage may occur to the

BlueCube+.

Make sure the polarity of

speakers are connected correctly.