Aquatic BLUECUBE+ AQ-BC-6UBT-X Manuel d'utilisation et d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Aquatic BLUECUBE+ AQ-BC-6UBT-X. Aquatic BLUECUBE+ AQ-BC-6UBT-X 18 pages. 'hide-away' media player

Imprimer la page

Getting Started

1.2 Connections (see Diagram 1.2.1)

1. 12-pin Watertight Harness*

The 12-pin harness supplies power and ground connections to the BlueCube+ Media Player

and four (4) speaker channel output connections from the BlueCube+ Media Player (see Wir-

ing Diagram 1.3.1).

Do not cut or modify the 12-pin harness* on the Bluecube+ side or warranty will be void.

2. FM Radio Antenna Jack

Allows connection of FM radio antenna. For best FM performance make sure the antenna is

extended to the highest achievable position.

3. Auxiliary Outputs - Rear

Allows external amplifiers to be connected to power additional speakers.

4. Auxiliary Outputs - Front

Allows external amplifiers to be connected to power additional speakers.

5. Auxiliary Inputs

Allows an additional RCA input, from a standalone unit or another stereo source.

6. 12V DC External Trigger (x2)

Allows for external lighting or relays to be triggered (3A max load).

7. USB Input

For connection of USB thumb drives with MP3 and/or WMA files. Charges compatible USB

devices when connected via USB cable.

8. Wired Remote 8-pin DIN Cable

Allows connection of a wired Remote Control (AQ-WR-6F sold separately).

9. Power On LED

When the BlueCube+ is powered on the LED will illuminate red.

10. Bluetooth Halo Aerial Connector

Connect the Bluetooth Halo Aerial Technology Antenna (AQ-BTANT-1) to the male SMA

connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m). Use

hands to tighten the connection (do not use a wrench). See section 1.5.

11. Power Attenuation Wires

Allows the output level to be adjusted from a factory preset of -3dB to either -6dB, 0dB or

+6dB. See section 1.6 for further details.

12. Bridge Mode Wire

Allows the left and right rear channels to be used to power a standard passive subwoofer

(e.g. AQ-SWP8-2) instead of speakers. See section 1.7 for further details.

Aquatic AV does not recommend the wired Remote Control AQ-WR-6F for use in spa applications.

*Retail packaged models only.

www.aquaticav.com

BlueCube+ Media Player AQ-BC-6UBT-X