Aquatic AQ-SWA8-1BT Manuel d'utilisation et d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Aquatic AQ-SWA8-1BT. Aquatic AQ-SWA8-1BT 10 pages. The aq-swa8-1bt active subwoofer is a high quality, robust and durable subwoofer with built-in amplifier and outputs for connection of standard full range speakers. tuned port for enhanced bass response. designed and built to withstand the harsh ipx4 cond

Imprimer la page

Installation & Wiring

3.1 Connecting the Subwoofer

The AQ-SWA8-1BT requires a wiring harness in order to connect to power and speakers.

All open wire connections should be soldered and protected against water and dust for best long

term performance.

1. You will need an Aquatic AV AQ-UNH-2 wiring harness or the factory harness on your stereo

system to complete the install.

2. Follow the Wiring Harness diagram below. Use a minimum of 18 gauge wire for power and

ground.

3. When the unit is powered on you will see the LED light up red on the panel.

3.2 Wiring Harness

Left Front Speaker

4 Ohm

Left Rear Speaker

4 Ohm

Right Front Speaker

4 Ohm

Right Rear Speaker

4 Ohm

www.aquaticav.com

Variable Voltage Input Selector

(White/strip)

OPTIONAL

Red Power LED

Fuse Box

Power Antenna (7)

No lower than a 4 Ohm speaker should be

No lower than a 2 Ohm load should be used

used or damage may occur to the subwoofer.

or damage may occur to the Digital Media

Locker.

Make sure the polarity of speakers are

connected correctly.

Make sure the polarity of speakers are

connected correctly.

Active Subwoofer AQ-SWA8-1BT

RCA Input (Red & White)

SMA Bluetooth Antenna Cable

Wiring Harness

connections (see below)