Aquatic AQ-SWA8-1BT Manuel d'utilisation et d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Aquatic AQ-SWA8-1BT. Aquatic AQ-SWA8-1BT 10 pages. The aq-swa8-1bt active subwoofer is a high quality, robust and durable subwoofer with built-in amplifier and outputs for connection of standard full range speakers. tuned port for enhanced bass response. designed and built to withstand the harsh ipx4 cond

Imprimer la page

Installation & Wiring

Active Subwoofer AQ-SWA8-1BT

3.3 Bluetooth Antenna

Included with your Aquatic AV Bluetooth Subwoofer is an upgraded Bluetooth Antenna.

When installed this Antenna will boost the range of your AQ-SWA8-1BT Bluetooth signal.

Please read the precautions and installation instructions below before installing the

Bluetooth Antenna.

3.3.1 Bluetooth Antenna Precautions

Make sure the arrow is pointing directly upwards towards the sky when the antenna is

mounted; this will ensure that the range is maximized.

If there is excess antenna cable length make sure this is coiled and not bent as bending may

cause damage to the cable.

For spa or hot tub installation the antenna should be located above the waterline otherwise

Bluetooth range will be drastically reduced.

3.3.2 Bluetooth Antenna Installation

1. Locate the 6" SMA Bluetooth Antenna

connection cable coming out of the main panel on

the AQ-SWA8-1BT.

2. Make sure the arrow is pointing directly upwards

towards the sky when the antenna is mounted to

ensure the Bluetooth range is maximized.

3. Screw on the provided Bluetooth Antenna,

avoiding bending the cable at a 90° angle.

4. Install the Bluetooth Antenna making sure the

arrow is pointing directly upwards towards the

sky. If there is no suitable surface to screw it in,

we recommend using a good quality double sided

tape.