Olympus DP12 Manuel d'instructions - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus DP12. Olympus DP12 48 pages. Microscope digital camera system

Imprimer la page

To unplug the AC adapter

Set the main switch of the control box to "

adapter's output connector 3 from the control box then remove the power

cord's plug from the power outlet.

Always use a power supply with the specified voltage.

Do not operate the camera system when any of the connectors

and plugs of the AC adapter and power cord is not completely

inserted.

Never insert or remove the power cord's plug or connector with

a wet hand.

If the AC adapter or cord is excessively hot or is emitting smoke

or odor, immediately stop using the camera system and remove

the power cord's power plug from the power outlet.

Also immediately contact your local Olympus representative.

Never attempt to power the camera system using an AC adapter

other than the provided. Doing so could cause a failure in the

control box or power supply or result in an unexpected accident.

Out warranty cannot cover problems caused by the use of an AC

adapter other than the exclusive AC adapter provided with the

system.

Never pull, bend or twist the AC adapter cord or power cord

excessively or try to extend the power cord.

If the AC adapter cord or power cord is damaged or disconnected

or there is a contact failure in a connector or plug, immediately

contact your local Olympus representative.

Be sure to unplug the power cord from the power outlet when-

ever the unit is not in use.

" (OFF), remove the AC

CAUTION