Olympus CX33 Manuel d'instructions - Page 34

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus CX33. Olympus CX33 40 pages. Biological microscope

Attaching the specimen holder CX3-SHP or CX3-HLDT

When attaching the camera adapter, also refer to the instruction manual of the camera adapter in use.

TIP

Be sure to use the specified camera adapter and the camera. Using those not specified cannot

NOTE

ensure the stability of the microscope.

Rotate the coarse focusing knob to fully lower the stage.

Loosen the specimen holder fixing knob a (2 pcs.) of the stage

plate and remove the standard specimen holder by pulling it toward

front side.

You can also loosen the specimen holder fixing knob a by

TIP

inserting the coin into the groove of the specimen holder fixing

knob a and rotating it in counterclockwise direction.

When using the specimen hold plate CX3-SHP

Put the metal plate c over the resin sheet (one sheet only) b by

matching respective U-shape grooves, and engage U-shape grooves

to the screws a . (Picture A shown on the left)

Be sure to peel off the protection sticker attached to both

TIP

surfaces of the resin sheet b before use.

When using the specimen holder CX3-HLDT

Insert the U-shape groove of the specimen holder b in the specimen

holder fixing knob a . (Picture B shown on the left)

While pushing the specimen holder toward the back (arrow direction),

tighten the specimen holder fixing knob a (2 pcs.).

You can also tighten the specimen holder fixing knob a by

TIP

inserting the coin into the groove of the specimen holder fixing

knob a and rotating it in clockwise direction.

Attach the camera to the camera adapter.

Loosen the clamping screws a of the camera adapter of the trinocular

tube sufficiently using the provided allen wrench, and remove the

cap b .

Insert the camera adapter into the camera adapter attaching portion

of the trinocular tube.

Tighten the camera adapter clamping screws a completely.