Olympus PER-E01 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Olympus PER-E01. Olympus PER-E01 10 pages. Underwater extension ring for pt-e series

Imprimer la page

Maintenance

For safe use of this product, always perform maintenance after each diving session.

For details, refer to "Handling After Shooting" and "Maintaining the Waterproof Function" in the PT-E series

case instruction manual. Apply the same procedures to this product.

After shooting, remove the inserted cam-

era and lens, then re-seal the empty

case and immerse it in tap water to

remove any salt as soon as possible.

Remove the O-rings from this product

using the provided pick for removing

O-rings. Take care not to damage the

O-rings.

Remove any foreign matter attached to

the O-ring grooves with a clean, lint-free

cloth or cotton swab. Also remove any

foreign matter from the O-ring contact

surfaces, the port mount thread on the

PT-E series case and the O-ring groove

of the PPO-E series lens port.

After making sure that the PT-E series

case is completely dry remove the

PPO-series lens port and this product

from the case.

Remove sand and dust from the O-rings.

Pinch each O-ring between your fingers

and lightly rub the entire circumference

to check for foreign matter, scratches

and cracks.

After removing foreign matter, apply the

provided grease to the O-rings and fit

them into the O-ring grooves.

To apply grease to each O-ring, squeeze

a drop of grease about the size of a

grain onto your finger and lightly rub the

entire circumference of the O-ring to

spread the grease thinly and evenly.

E-7