AlphaESS SMILE-G3-EVCT11 Manuel d'installation, d'utilisation et d'entretien - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} AlphaESS SMILE-G3-EVCT11. AlphaESS SMILE-G3-EVCT11 14 pages.

Imprimer la page

SYSTEM CONFIGURATION AND OPERATION

4.2 Setup on the AlphaCloud and App

After conﬁguration, the end user can monitor and set up the EV charger on the AlphaCloud

and App.

We have three charging strategies: Manual Setting, Timed Charging, Plug and Play.

Each strategy has four charging modes to choose from:

1. Green charge-slow charge

2. Green charge-general charge

3. Green charge-quick charge

4. Speciﬁc power charge mode

NOTE: Regardless of the chosen charging strategy, the charging mode

depends on what you have chosen.

4.2.1 Manual Setting

To charge the electric vehicle immediately, please click the "start" button or use the RFID

card after setting up the charging mode.

To stop the EV charger from charging, please click the "stop" button.

4.2.2 Timed Charging

You can also set two charging time periods for the EV charger.

4.2.3 Plug and Play Strategy

When the "Plug and Play" strategy is selected, the EV charger will start charging as soon

as the connecter is plugged in, and stop charging when the connecter is unplugged.

There is no need to swipe a card or control through AlphaCloud & App.

In this function, the Charging mode and the phase of OBC are needed to be set.

4.2.4 Charging Mode Instruction

NOTE: To start the EV charger, the current of each phase should not be less

than 6A.

SYSTEM CONFIGURATION AND OPERATION